The WALTER inverter welding machine is suitable for do-it-yourselfers and craftsmen as well as hobbyists. The device is suitable for TIG welding with non-consumable tungsten electrodes and for electrode welding with consumable sheath electrodes, thereby enabling comfortable and clean working without gas.
Thanks to its inverter technology, the WALTER welding machine has good welding properties and is characterized by comfortable working and no slag / reworking.
The WALTER welding machine has a compact size and light weight and can be used outdoors. Even wind is not a problem for the device. In addition, the welding current can be adjusted to the desired welding current. Another advantage is the thermal protection which protects the welding machine against thermal overloads.
- good welding characteristics due to inverter technology
- TIG welding with non-consumable tungsten electrode,
- comfortable working, no slag / no reworking (for welding iron, steel, stainless steel, nickel-base alloys)
- electrode welding with melting sheath electrodes (no gas required, for welding iron, steel, cast steel, stainless steel)
- ideal outdoors, even in windy conditions
- welding current infinitely adjustable
- compact and light (about 5,6kg)
- thermal protection against overheating
Weight without packaging:
8.1 kg
power supply:
230 V~/50 Hz
welding current:
TIG / MMA: 25 - 130 A
open circuit voltage U2:
60 V
working voltage U2:
TIG: 15.2 V; MMA: 25.2 V
electrodes Ø:
TIG: 1,6 - 2,4 mm; MMA: 1.5 - 3.2 mm
weight welding machine:
5.6 kg
dimensions:
36x13,5x23 cm (length/width/height)
length welding cable with workpiece clamp:
174 cm
length welding cable with electrode holder:
228 cm
- 1x inverter welding machine
- 1x TIG hose
- 1x welding cable with clamp
- 1x welding cable with electrode holder
- 1x welding protection shield
- 1x slag hammer with wire brush
- 2x tungsten electrodes
- 4x clamping sleeves (1,6/2,4 mm)
- 6x ceramic gas nozzles (size: 4/5/6)
- 1x user manual
Very good (4.62 / 5.00)
