Discover the versatile WALTER 2-in-1 dirty and clear water pump! With this practical device you can efficiently pump both waste and clear water. Ideally suited for controlling flooding as well as draining pools, ponds and rain barrels.
The WALTER pump impresses with its performance and versatility. With a minimum flow rate of only 50 mm, all containers are thoroughly pumped out. Whether waste water or clear water - this pump gets the job done reliably and effectively.
Thanks to the maximum pumping height of up to 9 m, you can also reach higher areas without any problems. The 10 m long power cable ensures flexible use without additional extensions. Handling is as simple as can be: by quickly pulling and turning the screw-on filter on the underside, you can effortlessly switch between waste and clear water.
Trust the WALTER 2-in-1 dirty and clear water pump - your reliable helper in many situations. Get this efficient 2-in-1 pump today and make your daily routine easier!
- can be used for waste water and clear water
- impressive maximum pumping height of 9 m
- easy handling due to exchangeable filter
- fast pumping out of containers
- versatile pressure hose connection for different diameters
mains connection:
220-240 V~/ 50Hz
capacity:
16.500 liters/hour / 16,5 m³/h
maximum immersion depth:
7 m
minimum conveying height (automatic):
150 mm
minimum delivery height (manual):
50 mm (dirty water) 5 mm (clear water)
diameter pressure hose connection:
1" = 25 mm | G1 = 33 mm | 1 1/2" = 38 mm | G1 1/2 = 47.8 mm
- 1x 2in1 water pump
- 1x universal hose connection
- 1x user manual
Very good (4.63 / 5.00)
