Precise work and pinpoint drilling! The WALTER bench drill with its extra powerful 900 W motor is ideal for all do-it-yourselfers with particularly high demands. Workpieces are clamped securely in just a few seconds with the included vice. A special highlight - the user-friendly digital screen, which provides information on speed, drilling depth, LED work light and cross laser.
The depth stop, which can be set in millimetres, ensures that at no time is drilling too far into a workpiece, while the progress of the current drilling can be read off at any time via the drilling depth display. With the powerful 900 W motor and the adjustable idle speed of 220 - 2580 min-1 , precise drilling is always possible, even in materials such as hardwood and metal.
The solid base plate measuring 34 x 30 cm gives the bench drill maximum stability. This can be attached to any workbench with ease. The metal drill chuck, which can take drills with a diameter of 1.5 - 13 mm, is also made of particularly high-strength material. In combination with the spindle stroke of 80 mm, this leaves nothing to be desired.
- digital display for easier operation
- adjustable depth stop
- drilling depth indicator
- LED working light and cross line laser for clean drillings
rated voltage:
230 V~ / 50 Hz
input power:
720 W S1 ; 900 W S2 6 Min
spindle speed:
I: 220-880 min-1 II: 650-2580 min-1
dimensions base plate:
340 x 300 x 40 mm
laser class:
II; l = 650 nm; P≤1 mW; EN 60825-1:2014
sound pressure level:
79.7 dB(A)
sound power level:
90.7 dB(A)
vibration level:
< 2.5 m/s2
idling speed:
1st gear 220 - 880 rpm / 2nd gear 650 - 2550 rpm
- 1x 900 W bench drill
- 1x user manual
Very good (4.63 / 5.00)
